供应发酵罐、**电锅炉

产品参数

（6-24KW参数）
型号规格 YN6-0.7-D	YN9-0.7-D	 YN12-0.7-D YN18-0.7-D YN24-0.7-D YN27-0.7-D	YN30-0.7-D
额定电功率（KW）	6	9	12	18	24	27	30
额定蒸发量（Kg/h）	8.6	12.9	17.2	25.8	34.4	38.7	43
电源电压（V）	220/380	220/380	380	380	380	380	380
额定工作压力（MPa）	0.7/1.0	0.7/1.0	0.7/1.0	0.7/1.0	0.7/1.0	0.7/1.0	0.7/1.0
饱和蒸汽温度（℃）	170/185	170/185	170/185	170/185	170/185	170/185	170/185
电源线截面积（mm2）	10/4	6/4	6	10	10	10	10
外形尺寸（mm）	L*W*H  640x380x960	L*W*H 650x420x1200
蒸汽管口径（mm）	DN15	DN15	DN15	DN15	DN15	DN15	DN15
排污管口径（mm）	DN15	DN15	DN15	DN15	DN15	DN15	DN15
进水管口径（mm）	DN15	DN15	DN15	DN15	DN15	DN15	DN15
产品重量（kg）	85	85	95	120	120	120	130
（36-50KW参数）
  型号 
规格         	LDR0.051-0.7	LDR0.064-0.7	LDR0.07-0.7
额定电功率（KW）	36	45	50
额定蒸发量（Kg/h）	51	64	70
电源电压（V）	380	380	380
额定工作压力（MPa）	0.7	0.7	0.7
饱和蒸汽温度（℃）	170	170	170
电源线截面积（mm2）	16	16	25
外形尺寸（mm）	L*W*H  820x600x1250
蒸汽管口径（mm）	DN20	DN20	DN20
排污管口径（mm）	DN20	DN20	DN20
进水管口径（mm）	DN15	DN15	DN15
产品重量（kg）	230	230	250
制造依据

1.	锅炉的制造符合《蒸汽锅炉安全技术监察规程》；JB/T10094-2002《工程锅炉通用技术条件》；JB/T10393-2002《电加热锅炉技术条件》。
2.	锅炉水质符合GB1576-2001《工业锅炉水质》。
3.	锅炉安装符合GB50273-98《工业锅炉安装工程施工及验收规范》。
4.	部件水压实验应符合JB/T1612《锅炉水压实验技术条件》的规定,水压试验压力为1.05MPa。




3-50KW**电蒸汽发生器
（英文）

技术特点 characteristics

1.	Exemption for boiler of the internal structure of card unique design 
This series of products water volume is less than 30 L, in the country of the exemption for the boiler within the scope of card, need not use card is dealt with the boiler. Furnace equipped with built-in water separator, bravery, solve the vapor carry liquid problem, ensure the high quality of steam more sex. 
2.	And the use of liquid crystal display automatic intelligent control system 
The boiler control system for automatic control, all of the operation state, are available on the LCD panel be clear at a glance. You can display in observed in electric heating boiler tubes work state, boiler water level state, state high and low pressure steam, water pump operation state, fault alarm status, so you can master the boiler operation condition, use more at ease.
3.	Use the high quality core components-electric heating pipes
    Electric heating pipes adopts the high quality not only thick wall 316 L stainless steel control, service life more than the commonly used 304 stainless steel tube 30%, and USES the import high temperature magnesium oxide powder and sealing materials, high temperature resistant up to 900 ℃. Better ensure the service life of the electric heating pipes. In addition, electric heat pipe and furnace and flange connection, to replace, repair and maintenance.
4.	Use the high quality components
All of the pipeline, and instrument connection all use stainless steel pipe or copper tube connection, the most famous delixi electric domestic appliances, the use of safe and reliable, configuration luxury.
5.	Multiple chain security protection function
With the product inspection of boiler and pressure relief valve check controller etc overpressure protection, prevent boiler pressure caused by excessive explosion accident; At the same time a limit low water protection, in water supply under the condition of the boiler stop will be to stop working, and prevent the boiler burning electric heating element to do damage to burn out even the phenomenon. The leakage protector let operation safety of people and equipment are more security, even in the boiler operation undeserved cause a short circuit, leakage of boiler will cut off the circuit automatically, timely protect operators and control circuit.
6.	Extremely easy installation and easy to use
Before the products leave the factory are through the strict test, the user need only to power and water connected and press the start button to enter fully automatic boiler operation state, need not multifarious installation. 
7.	Scientific design, elegant appearance
The cabinet of scientific design style, internal design reasonable structure, maintenance, and extremely convenient. The boiler shell adopts CNC cutting and CNC ruffled a molding process, fine workmanship, Shell surface after high temperature pensu processing, durable, appearance is beautiful and easy. 
8.	Using electric energy more environmental protection is more economical
Electricity is free of pollution, relative to other fuel more environmental protection, use the off-peak more dramatically the operation of equipment cost saving, energy saving and environmental protection is the best choice. 


技术参数  parameters

（3-24KW parameter）
 TypeSpec         	YN6-
0.7-D	YN9-
0.7-D	YN12-
0.7-D	YN18-
0.7-D	YN24-
0.7-D	YN27-
0.7-D	YN30-
0.7-D
Electric power（KW）	6	9	12	18	24	27	30
Rated evaporation（Kg/h）	8.6	12.9	17.2	25.8	34.4	38.7	43
Source voltage（V）	220/380	220/380	380	380	380	380	380
Rated pressure（MPa）	0.7/1.0	0.7/1.0	0.7/1.0	0.7/1.0	0.7/1.0	0.7/1.0	0.7/1.0
Steam temperature（℃）	170/185	170/185	170/185	170/185	170/185	170/185	170/185
Power wire（mm2）	10/4	6/4	6	10	10	10	10
Dimension（mm）	L*W*H  640x380x960	L*W*H 650x420x1200
Steam caliber	DN15	DN15	DN15	DN15	DN15	DN15	DN15
Drain outlet caliber	DN15	DN15	DN15	DN15	DN15	DN15	DN15
Water inlet caliber	DN15	DN15	DN15	DN15	DN15	DN15	DN15
Weight （Kg）	85	85	95	120	120	120	130
（36-50KW parameter）
 Type 
Spec         	LDR0.051-0.7	LDR0.064-0.7	LDR0.07-0.7
Electric power（KW）	36	45	50
Rated evaporation（Kg/h）	51	64	70
Source voltage（V）	380	380	380
Rated pressure（MPa）	0.7	0.7	0.7
Steam temperature（℃）	170	170	170
Power wire（mm2）	16	16	25
Dimension（mm）	L*W*H  820x600x1250
Steam caliber	DN20	DN20	DN20
Drain outlet caliber	DN20	DN20	DN20
Water inlet caliber	DN15	DN15	DN15
Weight （Kg）	230	230	250
(No separate notice will be made for any changes of the parameters)

制造规范 standard
1.	Boiler manufactured is up to the "Technical Supervision Regulation for Safety of Steam Boilers "; JB/T10094-2002 "Project Boiler Universal Technical Conditions"; JB/T10393-2002 "Electric Heating Boiler Technology Conditions." 
2.	Boiler water quality is up to GB1576-2001 "Industrial Boiler Water Quality."
3.	Boiler installation is up to GB50273-98 "Industrial Boiler Installation Project Construction and Acceptance Specification." 
4.	Testing of part Water Pressure should be up to experimental JB/T1612 " Technical Condition for Testing of Boiler Water Pressure ", hydrostatic test pressure of 1.05 MPa.